SGM Studio 12 User Manual download pdf (Page 30)

appendice

page 29

I D F E

In this case: and then

These settings therefore indicate when the channel of the dimmer function must be considered as

such (DIM) and when it must be considered as an effect (EFF).

Press the left-hand SCROLL to return to the creation menu now. Storage is automatic.

8.5.1.6 - Mirror/Head

This menu is used to set the channels dedicated to the movement of mirrors and moving heads.

Numerous fixtures allow 8 and 16 bit control, others only 8 bit. As already said in previous chap-

ters, 16-bit movement gives a better quality movement. However, since DMX standard requires

that each channel is assigned with a value of between 0 and 255, two channels (operating

together) are required for the higher resolution, so the value range is between 0 and 65.536.

In 16-bit mode the two channels (e.g. those for Pan) will have two special functions, called Least

Significant Byte (LSB, L or Fine) and Most Significant Byte (MSB, H or Coarse).

In 8-bit mode, just one channel is used (e.g. that of the Pan), so only the MSB (H) parameter is

set, leaving the LSB indeterminate (—-).

Remember to check if the fixture to be controlled is operating in 8 or 16 bit mode!

The following menu appears:

. Press the right-hand arrow

to access setting and the left-hand button to exit the function: the following appears on the

display: . Use the CURSOR

up/down arrows to set the value, left/right to pass from parameter to parameter and the right-

hand SCROLL to return to the previous menu.

In this case: if we want to

use the Victory in 16-bit mode (advisable), or

if it’s to be used in 8-bit

mode.

Press OK (right-hand SCROLL) to return to the previous menu.

8.5.1.7 - Slope Speed

This menu is used to set the speed with which the fixture passes from one effect to another. This

“run” can be HARD, i.e. taking place at the fastest possible speed, or SOFT, i.e. linked to the time

set using the SPEED potentiometer in the Scan Control section. The following menu appears:

. Press the right-hand arrow

Select feature to configure for esc<-

NNNNNNNNNNNN--[HARD/SOFT CROSS ] ok->

X(PAN) ≥ Y(TILT) ≥ MIRROR/HEAD

H[ 5]L -- ≥H 6 L -- ≥ OUTPUT ok->

X(PAN) ≥ Y(TILT) ≥ MIRROR/HEAD

H[ 5]L 11 ≥H 6 L 12 ≥ OUTPUT ok->

X(PAN) ≥ Y(TILT) ≥ MIRROR/HEAD

H[--]L -- ≥H -- L -- ≥ OUTPUT ok->

Select feature to configure for esc<-

NNNNNNNNNNNN--[MIRROR/HEAD PATCH ] ok->

PRISM ----------------------------- <->

[EFF] --- --- --- --- --- P2

DIMMR COLOR PALET GOBOS ROT.G SHUTR <->

[DIM] EFF EFF EFF EFF EFF P1

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 61 62

Comments to this Manuals

No comments

SGM Studio 12 User Manual Page 30

Comments to this Manuals

Related products and manuals for Floodlights SGM Studio 12