SGM Studio 12 User Manual download pdf (Page 27)

page 26

8.5 - Built-in memory

This memory, made up of 3 sections, is a fundamental part of the Scan Control’s “brain”: this is

where the units which are to be controlled are created, modified or cancelled from the built-in

memory.

Access is gained from the following menu:

8.5.1 - Creating a new unit

Operators can use this function to enter units any units the library doesn’t already contain.

ATTENTION! Before proceeding with the creation of a new unit, make certain to have all the

necessary information or better still, its instruction manual with all the informative tables.

Now, proceeding step by step through the entering of the required parameters, a new unit can be

ready for use in just a few minutes.

The initial menu is the following:

Access is gained to the library by pressing the right-hand SCROLL button.

N.B. To simplify menu examples, we shall create an SGM Victory II 250 as a new fixture.

8.5.1.1 - DMX channel total

This information allows Scan Control to know how many channels new units use. As already

seen, the maximum number possible is 36 channels, of which 6 are reserved for movement and

auxiliary functions.

The menu is the following:

. Pressing the right-hand

arrow gives access to the setting, by pressing the left-hand button, the function is exited.

The display will show .

Using CURSOR up/down arrows, operators can increase the number of channels required for the

new unit. The choice is confirmed by pressing the right-hand SCROLL.

8.5.1.2 - LCD effect labels

This menu allows descriptions of the commands required by the new unit to be written on the

LCD. The menu is the following:

. Pressing the right-hand

arrow gives access to the setting, by pressing the left-hand button, the function is exited.

Select feature to configure for esc<-

NNNNNNNNNNNN--[LCD EFFECT LABEL ] ok->

Total channels occupied on dmx esc<-

NNNNNNNNNNNN-- [12] ok->

Select feature to configure for esc<-

NNNNNNNNNNNN--[TOTAL DMX CHANNEL ] ok->

--- INTERNAL LIBRARY CONFIGURATION ---

Select ITEM --- [CREATE NEW UNIT ]

CONFIGURATION & SET UP

SELECT --> [INTERNAL LIBRARY ] ok->

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 61 62

No comments

SGM Studio 12 User Manual Page 27