SGM Studio 12 User Manual download pdf (Page 18)

appendice

page 17

I D F E

7. DMX Unit Control Section

This section of the console comprises a universal control-

ler for units requiring a maximum of 36 control channels,

6 of which are dedicated to movement functions (Pan &

Tilt, 4 channels), remote unit reset and remote lamp igni-

tion.

The majority of the functions involve automation, so the

section’s recognisable by its dark grey knobs and buttons

and light blue printing.

This section’s logic is the same used for the Chase sec-

tion: programs can be output independently or added to a

memory register (with DIRECT, STORE and REG func-

tions respectively).

The section, which shall be called “Scan Control” to sim-

plify matters, is able to control 12 units by means of 12

programs with 12 scenes each. Units can be controlled

individually or in groups.

Scan Control has a control for music sync ( function) and a control for inverting the direc-

tion the scenes run in: pressing the button, the scenes, which normally run from 1 to 12,

will run backwards (from 12 to 1).

The function allows to “freeze” the program being run at one scene. When the button is

pressed, the scene running at that moment is finished and the program run suspended. The ope-

rator can then press any scene button to pass to a new scene, not necessarily the one before or

the one after the scene put on pause, or can pass to another program. For as long as pause is

enabled, the effects will continue working (e.g. gobo or prism rotation), whereas the movement

will be finished (unless they are factory-programmed effects - see parag. 7.3).

As with the Light Chase Control section, Scan Control can only be used to create programs in

DIRECT mode. When a variation is made to a scene, the PAUSE function is automatically ena-

bled: remember to disable it to start the program running again!

The function is used to transfer a selected program to a memory register with all its relati-

ve options (Speed, Rate, Music, Bkward, Scene, Unit and Effects).

The button gives access to the console’s so-called “utility” functions:

- remote fixture reset

- lamp ignition and dousing

- definition and control of the operating area for scanners and moving head units.

The section is completed by two rotary pots for adjusting programs’ running parameters:

util

store

pause

bkward

music

pan tilt

1 2 3 4 5 6 7 8 9 10 11 12

rate speed

music

bkward

pause store reg direct util

dmx unit controls

1 2 3 4 5 6 7 8 9 10 11 12

setup

prog

scene

unit

min max

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 61 62

Comments to this Manuals

No comments

SGM Studio 12 User Manual Page 18

Comments to this Manuals

Related products and manuals for Floodlights SGM Studio 12