SGM Synthesis Wash 700 Instruction Manual download pdf (Page 36)

GB SGM Technology for lighting

User Manual 1.00 34 Synthesis

Reserved functions

Some fixture functions cannot be accessed by operators as they regard software

sections as yet to be defined in this firmware release. When RESERVED appears on the

display, you are in this section. Access is forbidden.

Temperature

This menu allows to display the internal temperature detected in many points of the

fixture and measured both in Celsius and Fahreneit degrees.

Thanks to a sophisticated software, Synthesis is able to activate internal projections

with the aim of avoiding overheating. The internal temperature are kept fixed through

the fans electronic control and the lamp power.

To check the internal temperature, proceed as follows:

1. Connect Synthesis to the power supply, wait till it has completed reset

operations.

2. Use the UP/DOWN keys to find the “TEMPERATURE” menu.

3. Press “Enter” to confirm.

4. Use UP/DOWN keys to select the temperature to be checked.

5. Press “Enter”to get out from the menu.

Version

Only for reading, this menu allows to check the information on the microprocessors

software versions used on the fixture.

To check the software version, proceed as follows:

1. Connect Synthesis to the power supply, wait till it has completed reset

operations.

2. Use the UP/DOWN keys to find “VERSION”menu.

3. Press “Enter”to confirm.

4. Use UP/DOWN keys to visualize the software installed on the microprocessors.

5. Press “Enter” to exit the menu.

RESERVED

TEMPERATURE

VERSION

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

No comments

SGM Synthesis Wash 700 Instruction Manual Page 36