SGM Synthesis Wash 700 Instruction Manual download pdf (Page 12)

GB SGM Technology for lighting

User Manual 1.00 10 Synthesis

2 INSTALLATION

2.1

Equipment

During unpacking, make certain that all the necessary parts have been received and that the fixture has not been

damaged during transport. Should there be any problems, contact the local authorized SGM distributor

immediately.

Only the customer, in fact, can claim eventual damages in the fixture caused by the transportation.

 SYNTHESIS

 WARRANTY BOOKLET

 USER MANUAL

 1 XLR 5 P MALE CONNECTOR

 1 XLR 5 P FEMALE CONNECTOR

 1 POWER-CON CONNECTOR

 2 FAST-LOCK CLAMPS

 2 ADDITIONAL LENS

 1 SAFETY CABLE

 1 ANTENNA WIRELESS

 1 OSRAM LAMP

DO NOT DESPERD THE PACKING ELEMENTS.

THE PACKING ELEMENTS (PLASTIC BAGS, FOAM, NAILS, ETC.), MUST NEVER BE LEFT NEAR CHILDREN, AS DANGEROUS. USE

THE ORIGINAL PACKAGE IN CASE OF FIXTURE RETURN TO THE MANUFACTURER FOR REPAIR OR MAINTENANCE SERVICE, IT

HAS BEEN SPECIFICALLY MADE TO PROTECT THE FIXTURE DURING THE TRANSPORT.

2.2

Power cable construction

Before installing the fixture check that the power supply cable AC is disconnected.

 Wiring and connection work must be carried out by experienced qualified staff.

 Class one equipment must be earthed (grounded)

 Do not power Synthesis units with dimmers, as this could damage their on-board power supply

 Before connecting the unit, make certain that the mains power supply is the same as indicated on the fixture’s

ID plate

 The unit must be protected by a thermal/magnetic circuit-breaker

Symbol Pin EU US UK

L Live Brown Yellow/Copper Red

N Neutral Blue Silver Black

Ground Yellow/Green Green Green

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

No comments

SGM Synthesis Wash 700 Instruction Manual Page 12