SGM Synthesis Wash 700 Instruction Manual download pdf (Page 29)

SGM Technology for lighting GB

Synthesis 27 User Manual 1.00

Pan/Tilt inversion

This function also allows to optimize Synthesis moving head in relation to the

operator’s position, in order to simplify all positioning procedure. When SWAP is

enabled (ON), this means that the lighting console sends the data regarding Pan to the

Tilts controls and vice versa.

To invert Pan and Tilt movement proceed as follows:

1. Connect Synthesis to the power supply, wait till it has completed reset

operations.

2. Use the UP/DOWN keys to find the “PAN TILT SWAP” menu.

3. Press ENTER to confirm. The message on the display will start to flash.

4. Use the UP/DOWN keys to select which of the two available options is required

5. Press Enter to confirm.

Lamp elapsed time meter

Synthesis microcomputer stores various data, including those related to the number of

hours the lamp is lit (elapsed time). This is necessary to know in advance when it’s

almost time of relamping: lamp life is approximately 750 hours.

To see how many hours a lamp has been used, proceed as follows:

1. Connect Synthesis to the power supply, wait till it has completed reset

operations.

2. Use the UP/DOWN keys to find the “Lamp Hour”menu. The lamp life hours will

be displayed automatically.

Resetting the lamp elapsed time meter

Each time a new lamp is fitted it’s possible to reset the meter indicating the elapsed

time in order to have the real elapsed time for the lamp about to be fitted.

To reset the lamp elapsed time, proceed as follows:

1. Connect Synthesis to the power supply, wait till it has completed reset

operations

2. Use the UP/DOWN keys to find the “Lamp Hour”menu.

3. Press ENTER to confirm. The message on the display will start to flash.

3. Use the DOWN key to reset the meter.

4. On the contrary, pressing the UP key restores the previous value.

5. Press Enter to confirm.

Lamp strike meter

Synthesis microcomputer stores various data, including those related to the number of

lamp strikes. This information is important because the ‘unuseful’ lamp strikes cause

stress to the components, so they can contribute to reduce the lamp life.

To know the lamp strikes number:

1. Connect Synthesis to the power supply, wait till it has completed reset

operations.

2. Use the UP/DOWN keys to find the “Lamp Strike” menu. The strikes number

will be displayed automatically.

PAN TI

LT SWAP=OFF

LAMP

HOUR

LAMP

HOUR

LAMP STRIKE

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

Comments to this Manuals

No comments

SGM Synthesis Wash 700 Instruction Manual Page 29

Comments to this Manuals

Related products and manuals for Floodlights SGM Synthesis Wash 700