1. Press the Direct button
2. Press the program number and release, the program is now running
3. Set the time of the program using Speed and Rate knobs
4. Pressing the Bkward button can run the program backwards
5. The program can be stopped at any time by pressing the Pause button
6. Press the Music button if a sound to light flowing of programs’ steps is required.
To assign a program to a memory Register:
1. Press and hold Reg button
2. Select the desired memory register by pushing its button
3. Release Reg button
4. Press the Direct button
5. Press the desired program number and release, the program is now running
6. Set the time of the program using speed and rate knobs
7. Press and hold down the Store button
8. Press again the button of the selected Register
9. Release Store button
Utility Functions
The button Util gives access to the console’s “utility” functions:
- remote fixture reset
- lamp ignition and dousing
- definition and control of the operating area for scanners and moving head units.
To set or modify the Working Area:
Operators often have to limit a fixture's scanning area to adapt stored programs to stage
situations, which often change.
With a view to this, Studio consoles allows to control the 12 different scanning areas for
each fixture (obviously only scanners and moving head units) which operators have at
their disposal.
Reducing the scanning area of a fixture also considerably improves the precision of
moving parts, whether they're mirrors or heads. In fact, reducing the scanning area doesn't
reduce the number of steps for positioning, which remains unchanged (255 for 8-bit
fixtures and 65.536 for 16-bit fixtures). If the fixtures being controlled don't have
commands for automatic inversion of scanning co-ordinates, the scanning areas allow to
solve the problem by simply crossing over the corner values.
1. Press the Util button.
2. Scroll with the scroll buttons until “Working Area” appears on the display.
3. Push the button unit number whose working area has to be modified
4. With the Left/Right buttons select the SET 1 field and use the fader below to choose
one over the 12 available scanning areas (SET 1 to SET 12)
18
SGM Light Technology 23/08/1999 Ver. 2.00
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals