11
Installation
GiottoSpot 400 rel.1.01
GB
1.6 Fitting/removal gobo adapter
FITTING: Select the position in which the adapter is to be installed
on the effects wheel, remove the colour filter if there is one (par. 1.7),
open the disks (3) using the least possible force, slide the spring (A)
in until it fits into the engraved slot, then fit the adapter (B) by pushing
lightly in the direction indicated by the arrow.
fig. 3
REMOVAL: Select the adapter to be removed from the
effects wheel, push lightly upwards (see figure 4 point 1)
until it comes out of its position and remove the adapter (B).
Open the disks (3) and remove the spring (C).
fig. 4
1.7 Installing /replacing color filters
Choose which of the wheel's dichroic filters is to be replaced, grip it firmly between your fingers, carefully widen the discs (1), slide
the filter out in the direction indicated by the arrow (2). Carefully widen the discs again (3) and slide the new filter in (4) until it fits
into its engraved slot.
Comments to this Manuals